S3+ Speed/Cadence Sensor
- FAQ
- VIDEOS
- MANUALS
Why there is no cadence data displayed by Magene S3+ with cadence mode?
1. Please check whether the mode of the S3+ is correct.
When the battery is installed, the red light flashes to indicate that it is in cadence mode. If the mode does not correspond to cadence, the data will be abnormal.
If the sensor is connected to a bike computer, please make sure the mode of the sensor is correct, then forget the sensor on the bike computer, and connect again.
2. Maybe a compatibility issue.
Please try to connect the sensor to Magene Utility APP, then see if the speed data will display.
3. Please make sure the cadence data is within the detectable range.
The range of cadence that can be detected is 30-160. If it is in a low cadence state, the data will become 0.
4. Make sure there are no magnetic fields around.
The sensor uses geomagnetic sensor measurement data, if there are any magnetic fields around, the data will be affected.
Why there is no speed data displayed by Magene S3+ with speed mode?
1. Please check whether the mode of the S3+ is correct.
When the battery is installed, the green light flashes to indicate that it is in speed mode. If the mode does not correspond to speed, the data will be abnormal.
If the sensor is connected to a bike computer, please make sure the mode of the sensor is correct, then forget the sensor on the bike computer, and connect again.
2. Maybe a compatibility issue.
Please try to connect the sensor to Magene Utility APP, then see if the speed data will display.
Why the new Magene S3+ cannot be found by the software/equipment?
1) Please check whether the battery separator is removed.
2) Make sure the sensor is not connected to other devices.
3) In order to save power, the sensor will go to sleep when it detects no data for 1 minute. Normal broadcasting will resume when the device is used.
4) Please check if the sensor can be found on Magene Utility. If it can be found and connected on Magene Utility, please check if the location and Buletooth permission is given to the software, if given, please check whether the software/equipment supports Magene S3+.
5) Reinstall the battery, and check if the indicator light is on. If not, the battery may be installed incorrectly, or the battery may be dead, please replace it with a new one.
Which APP and bike computers are compatible with Magene S3+?
Compatible with all standard ANT+ protocol APP and bike computers: Bryton, Garmin, iGPSPORT, Zwift, Onelap, Bkool, Tacx, etc.
Compatible with standard Bluetooth protocol APP and bike computer: Suunto Bluetooth sports wristwatch, Wahoofitness, etc.
What communication protocol does S3+ Sensors use?
The product supports both Bluetooth 4.0 and ANT+ protocols.
How to switch the operating mode of Magene S3 +?
The product supports both Bluetooth 4.0 and ANT+ protocols and can be used as both a speed sensor or a cadence sensor.
Re-installing the battery will switch modes between cadence and speed sensor.
When the battery is installed, the green light flashes to indicate that it is in speed mode, or the red light flashes to indicate the sensor is in cadence mode.