When the computer is connected to the Onelapfit application, you can click Functions to set the functions of the bike computer.
Time Zone
The default time zone of the bike computer is UTC+08:00, and the bike computer will automatically sync the time zone of the mobile phone system when connected to app.
Elevation calibration
You can calibrate the elevation on the bike computer to the elevation indicated by your phone acquired or input elevation based on your experience.
Backlight Settings
- Auto Backlight
- When the Auto Backlight is turned off, you need to hold button C on the computer to turn on the backlight.
- When the Auto Backlight is turned on, the bike computer will atuo display backlight base on sunrise and sunset time according to the time zone.
- Manual Backlight Timeout
The backlight on time can be set to 5 s, 10 s, 15 s, 30 s, 60 s and always on
- Backlight Brightness
The backlight brightness can be set to Low, Medium and High.
Auto Lap
When the Auto Lap function is turned on, the bike computer can record the lap data automatically according to the lap settings.
When the Auto Lap function is turned off, you can record lap data by short press the C key.
The Lap paramter can be set to be calculated based on distance or time, the setting range of the distance is 0.1-100km, the setting range of the time is 5-600min.
Auto power-off
When the Auto power-off function is turned off, the bike computer will remain in the standby state after it is turned on, unless you press and hold the A key to turn it off.
When the Auto power-off function is turned on, if no date is recorded by the bike computer, it will automatically turn off according to the set time.
Auto Pause
When the Auto Pause function is turned off, you can pause the riding by short press the button A.
When the Auto power off function is turned on, the bike computer will pause automatically when the detected speed goes below the designated speed you set.
You can turn on/off the Auto Pause function on Me- My bike computer- settings.
Bike computer sound control
You can set the functional prompt tone, keypad tone, recording reminder.
Estimated power
When no power meter is saved to the bike computer, estimated power is displayed during a cycling if power is selected.
Recording reminder
A reminder will be issued if the bike computer detects data changes but recording has not yet begun.
HR Alarm
If the HR Alarm function is turned on, when the bike computer is connected to the HRM and detects heart rate data beyond the alarm value, data on the screen flashes.
Note:
HR Alarm value range is 100-240.
Power Alarm
If the Power Alarm function is turned on, when the bike computer is connected to the power meter and detects power data beyond the alarm value, data on the screen flashes.
Note:
Power Alarm value range is 100-2500.