1. File Download---Before enabling this feature, you must ensure that the FreeRide files for your current region are stored on the bike computer. If no files are stored, you need to go to the OnelapFit app to download them.

2.Mutually Exclusive Rules for Planning Methods: Only one climb planning method can be applied at the same time. If route navigation (including the scenario of route re-planning after off-route) has been used for the current ride, the FreeRide climb planning function cannot be enabled throughout the entire duration of the route ride. 

3. Climb segment data is automatically calculated by the algorithm and serves only as general guidance for cycling. If you encounter safety hazards during use (such as segments located on elevated bridges), please avoid these climb segments.

1. Ensure both the OnelapFit app and the bike computer are running the latest versions. 

2. Map files can only be downloaded via Wi-Fi. We recommend connecting to a stable home or office network and avoiding public Wi-Fi with frequent interruptions. 

3. Do not switch modes, restart, or power off the bike computer during download, as this may corrupt the file. 

4. Downloaded map files are exclusively compatible with the C706 bike computer and cannot be transferred between devices (for example, copied to other C606 series bike computers). 

5. If download failures occur ≥3 times, check Wi-Fi signal strength and try moving the bike computer closer to the router. 

6. Cross-border map download rules: a. Schengen Area: Supports selecting and downloading map files across multiple countries. b. Non-Schengen Area: When selecting an area across multiple countries, the system will automatically download the map file of the country with the largest geographic coverage within the selected area. 

7. For additional download considerations, refer to the help page in the upper-right corner of the map download interface.

1. Prerequisite: At least two map files must be downloaded. 

2. Steps: Open the OnelapFit app. Navigate to My > My Computer > Select C706 device > General Settings > Map Download > File List. Select the desired map file, enter the edit page, toggle the "Apply This File" switch, then tap "OK" to complete the map application status switch.

1. Confirm file status: Verify the target area map has been downloaded and the file status shows as "In Use." 

2. Check scale levels: The map displays the full road network at scale levels 50 m-200 m. Levels 500 m-20 km+ show only major roads. Adjust the scale to view. 

3. Restart the device: If the map display remains abnormal, try restarting the device and check again.

4. Redownload: If the above methods fail, delete the map file and download it again.

Insta360 X4 Air, Insta360 X5, DJI OSMO 360, DJI Action 4, DJI Action 5 Pro.

1. Long Batt enabled: Disable this mode.
2. Wi-Fi not 2.4GHz: Set your router to 2.4GHz with channel ≤11. If still undetected, test with laptop hotspot set to 2.4GHz.
3. Bluetooth data packet mismatch: If 2.4GHz hotspot is undetected, the phone's Bluetooth version may be incompatible. Submit logs, OnelapFit account, and device SN for troubleshooting.